- 82.9LEGITIMACY SCORE
- 83.4SAFETY SCORE
- 4+CONTENT RATING
- FreePRICE
UISP Mobile App User Positive Comments 2024
UISP Mobile app received 44 positive comments and reviews by users. Can you share your positive thoughts about uisp mobile?
Please wait! UISP Mobile Facebook comments loading...
UISP Mobile for Positive User Reviews
✓ Vision Pro support! Love it!Thank you so much, Ubiquiti, for allowing this app to be used with my Vision Pro! Very excited to see it develop in this platform! Please bring Protect next!.Version: 2.31.0
✓ After 2 weeks. Still cannot setup NS 5AC using help or communityUnable to setup.Version: 2.17.2
✓ Works so wellDefinitely recommend the gear and the app. The devices have been running for over a year and haven’t missed a beat..Version: 2.14.1
✓ Almost AmazingWish the mobile version would allow more access to ports and searching for specific devices when looking for an error on a port..Version: 2.17.2
✓ Nice but...It’s a nice app but if you click on “status” then “show interfaces” then when you click on a VLAN or an eth, you get the one below. Eg click on vlan40, get vlan30; click on eth3 get eth2. That could do with sorting out..Version: 2.15.2
✓ FunctionalIt works. Needs more of the UNMS settings integrated into the app, such as adding users. Missing notification options, should be able to send push notifications on device up/down. Edit to developer response: Notifications would be an excellent edition. Note, having user management is explicitly mentioned as it's something we have needed to do in the field and we're surprised we couldn't reset a users password using the app..Version: 2.12.0
✓ Nice and easyThe app was easy to set up, has a great GUI and the colour scheme makes viewing easier on the eyes. The only suggestions I would make is to allow users to set up their display as they would prefer such as removing the notifications and replacing with connected stations or something of that nature. I also don’t like how each time I log in I need to adjust the filter to show only active stations where this I would like to set as a default. Overall a great system..Version: 2.18.5
✓ Great for monitoring devicesI have a super simple home network consisting of an EdgeRouter X, a non-Ubiquiti switch and an non-Ubiquiti AP. I've been playing around with UNMS controller just for fun. I discovered that you can add third part devices so it's cool to see at a glance that all devices are online. Feature request: I would like to have the ability to block clients from the list of DHCP clients..Version: 2.13.4
✓ I hope it supports the Arabic languageI hope it supports the Arabic language.Version: 2.24.0
✓ Awesome appI got 2 powerbeams ac gen2 and it was sooooo easy to set up my devices I definitely recommend this app.Version: 2.13.4
✓ Pretty awesome and keeps getting betterStill missing a few features but it’s getting better all the time..Version: 2.7.3
✓ GoodWould be nice to view airtime in devices view..Version: 2.7.3
✓ YayFixed now thank you.Version: 2.32.1
✓ IOSGreat tool to manage your networks..Version: 2.6.2
✓ Good but needs firewall controlReally good app to see status but I wish I could edit firewall rules from the app since the mobile website for my ERX isn’t the most responsive in design..Version: 2.15.4
✓ LOVE UNMSSimple quick and easy to use.Version: 2.8.1
✓ Great admin app but has issuesThis is a very well built app but there is one big buggy issue. When you try to upgrade the router firmware via the app you cannot hit the firmware download button no matter where you tap. It just keeps being up the info screen on the firmware. Other than that it is a great app..Version: 2.15.2
✓ Come a long wayThe app and unms in general are becoming a very useful and powerful tool. Still issues with scalability, multi tasking, but it's certainly heading in the right direction. The app is quite feature rich now..Version: 2.7.2
✓ Excellent job!Clean look and only the data needed to monitor our systems..Version: 2.17.1
✓ Feature RequestI do like this app and find it useful. I would love the ability to enable and disable firewall rules through it. Don't need to be able to create them but even just a toggle option would be great!.Version: 2.18.1
✓ Request to add DFS suffix to channel listWould like to see DFS included in channel list. Also when logged in to radio you can’t see the TX power anywhere in details or configure. Speed test is also missing from tools most of the time..Version: 2.13.3
✓ Nice app to monitor my WISPI use this app daily and without it I would be running my WISP blind..Version: 2.6.1
✓ Best app everGood job keep up the good work.Version: 2.2.2
✓ Great appMakes my job easier with WiFi management devices.Version: 2.8.1
✓ Really needs Edge Switch SupportI really appreciate what’s going on here, and I like the potential the app has. I understand this is not UNIFI, but I would at least really love to have support from my switches.Version: 2.3.0
✓ One gripeI have gps coordinates enabled on all 52 of my radios, however they do not show up individually on the map, only the site they are assigned to..Version: 2.24.0
✓ Nice!It’s pretty nice to have! If I might make a suggestion: allow editing of device location (geographical coordinates) in the app. Thanks!.Version: 2.6.2
✓ What a differenceI run a wisp in my area and this app made a huge difference in trouble shooting my antennas plus doing maintenance. The online version is even better. Love getting payments and reactivating people on the spot..Version: 2.12.0
✓ Audible PingI would highly appreciate adding audible feedback for pinging an IP address, in addition to the visual feedback that is currently available. Similar to the Antenna alignment feature inside the app..Version: 2.24.3
✓ UNMS APP ExcellentGreat app, easy to use and very stable, I like the ability to switch to desktop mode from within the app..Version: 2.8.1
✓ Dead simpleI used the app to setup an AirCube in about 5 minutes, including the app download.Version: 2.8.0
✓ Very helpful app...Works great on iPhone but notifications not always updating on iPad..Version: 2.17.2
✓ Stop workingHave serval phones with it installed and now has stop working after last update devices. Will not connect to devices or pick them up in discovery. But the standalone discovery app does and can web browser into devices. Issue is with the app, please fix this..Version: 2.3.0
✓ Good appDoes lack many web features, though, such as setting up and configuring fault tolerant WAN. As a simple mobile app, this works great for checking which WAN network is currently in use..Version: 2.27.1
✓ ElectrmReally good application.Version: 2.19.5
✓ Pretty good - no replacement for AC2 thoughIt's an OK app, but there are inconsistencies between what UNMS shows and what AirControl2 does - and AC2 is accurate. Mostly occurs with older M-series radios (frequency ranges, Tx power etc) Decent, but far from excellent still. Integration of units using QR code still somewhat rough at times, especially if already configured, but have been unused for some time. Reset first is best..Version: 2.16.0
✓ Very nice, yet missing a few thingsAll in all the functionality is great. I am able to use this on the go to quick config equipment, as well as log in to my UNMS server to manage existing deployments. I would like to see the ability to upload a backup to a new device, which currently is a feature that is missing. All in all a solid product..Version: 2.12.1
✓ UnmsAnother grade app from ubiquity I can’t wait to see what this platform will be like in the next two years.Version: 2.6.2
✓ Convenient but buggyThis is a convenient app to use for setting up our Nanostation 5ACs if they are already updated, but if not the first thing it does it make you update the firmware and when I try to do that, the app crashes..Version: 2.5.0
✓ Great transition between camerasWhat I like most about the iPad version is jumping from camera to camera and keeping the time of the scene. It allows for tracing the action from one camera to the other!.Version: 2.15.2
✓ ServiceableStill less feature-complete compared to the web interface and would be a lot better if it supported the multitasking modes on iPadOS.Version: 2.12.1
✓ Life Saver!I have been very impressed with the latest update. It includes a restart option for the radios now. Must have. Highly recommend!.Version: 2.2.0
✓ Love this appI’ve been using UniFi for years and I love all their equipment and apps.Version: 2.28.0
✓ Add the ability to see all interfaces!Would love to see all interfaces like the web console (VPN interfaces like Wireguard). This is the only thing keeping me from a 5 star!.Version: 2.12.1
😕 UISP Mobile Negative Reviews
